This rifle features an American Spirit Arms forged upper and lower receiver,
11.5" ASA 9mm barrel with A2 FSP and A2 flash hider.
It has a milspec trigger group, standard A2 forend, pistol grip and Magpul CTR collapsable stock.
Comes with 1 mag.
|Condor Tactical 36" Inch Single Rifle Case
The Condor rifle cases is fully padded for maximum protection with an addition 26" front compartment for pistol, optic,or other accessories.
It comes with 3 modular pouches that combines to hold up to 14 5.56 magazines.
Condor 36" Double Rifle Case
The Condor double rifle cases are designed to carry two primary weapon, with the addition 26" compartment for pistol, optic, SMG or other accessories. It comes with 3 modular pouches that combines to hold up to 14 M4 magazines. The padded divider separates the two rifles and the entire case is fully padded for maximum protection.
- • Main Compartment: accommodate two rifles, 36" long with four hook & loop straps to secure weapons.
- • Outer Compartment: 26" long with two internal pocket for pistols, optics or other accessories.
- • Removable padded center divider.
- • Hide away/Detachable padded backpack strap with sternum strap.
- • Import
- • Two modular Mag pouches
- • One modular Utility Pouch
- • 3/4" Padding
US PeaceKeeper SMG/SBR Case Black Soft 26X2.25X13
This is a matched upper and lower set. It is based off the Armalite AR-10 platform, therefore uses Armalite mags and handguard designed for the Armalite AR10 platform. The lower and upper are assembled and ready to be a part of a complete, accurate shooter. Includes milspec trigger group, Hogue pistol grip, side charging handle, modified chrome plated BCG and 1 mag.
At American Spirit Arms we're proud to offer our industry-leading Side Charger Receiver. This receiver was designed as one of the most highly desired options for the AR-10. By relocating the charging action to the side, as opposed to the rear of the receiver, the shooter can maintain a sight position and shooting position while charging the chamber with ammunition. Additionally, the charging handle on our side charger receiver does not reciprocate with the action of the bolt. This provides a much safer operation than the alternative.
- 7075 Aerospace Aluminum Flat Top Side Charger Upper Receiver
- Mil-Std 1913 Rail
- Features M4 Feed Ramps
- Assembled with the highest quality mil-spec components
- Limited Lifetime Warranty
ASA forged flat top upper receiver, 11.5" chrome-moly 1:10 twist barrel chambered in 9mm, complete 9mm BCG, A2 flash hider, A2 front sight gas block and A2 plastic handguard. Comes with 9mm magwell adapter and 1X 5/25 mag (employs modified UZI mag). Magwell adapter will fit directly into the magwell of a standard AR15 lower, no modification required.
The most feature packed bag produced!
For years we have been bringing in and using drag bags and shooting mats from various manufacturers.
All of them seem to have some things we like and some we do not. SO we decided to commission what we think is the Ultimate rifle soft case...
In many instances a shooting mat is something many of us employ, so why not as some have already done make the gun case and shooting mat 1 accessory. This saves the cost of the mat as well as having 2 things to hump around.
This is what we came up with.
Industrial grade water resistant 1000 denier cordura nylon material, YKK military grade zippers and buckles. All stitching is double seam, the cut edges of the fabric are hot cut to prevent unraveling, then have a finish edging sewn on. Lots of molle webbing.
The carry handle and removable back pack straps are all double sewn and are continuous around the bag and overlapped.
No chance of handle or strap sewing failing and allowing the gun to fall.
It folds out flat to make a shooting mat that is 48" wide by 94" long. The gun case part being 48x48" and having 1" think high density foam, the same type as the higher quality camping mat employ. The 39" of rubberized ground sheet that folds out of the case to keep the shooters legs and feet from the ground/mud/snow has 3 spike loops to keep it from moving or blowing about. There is also an optional removable front tarp for those who shoot rifles with brakes on them and hate the dirt that is thrown up.
- Available in OD green only.
- full water-resistant Construction 1000 denier cordura
- Closed case lengths are 48"
- Optional front bib for added real estate
- Full double seam Stitching
- YKK military grade zippers and buckles
-Detachable Front blast tarp with stake downs- $25
(Extra clean, dry area keeping any dirt from blowing up from muzzle brakes)