Magpul MBUS Gen 2 Sight Set

$140.00
Choose options from dropdown list(s) below

Magpus MBUS Gen 2

Temporarily out of stock

Product Details

The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The MBUS Front Sight is adjustable for elevation and fits most 1913 Picatinny-railed hand guards, but is specifically tailored to the AR15/M16 platform.The dual aperture MBUS Rear Sight is adjustable for windage and fits most 1913 Picatinny rail equipped weapons, but is specifically tailored to the AR15/M16 platform.

Made in U.S.A.

FEATURES

Impact resistant polymer construction provides light weight and resists operational abuse
Spring-loaded flip up sight easily activated from either side or by pressing the top
Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
Clamps to MIL-STD-1913 Picatinny/STANAG 4694 receiver rail and provides the same height-over-bore as standard A2 irons
Protective wings shield the dual, same plane flip apertures
Sight can still be folded with either large or small aperture in position
Detent knob easily and positively adjusts windage

E.A.R.

Export Administration Regulations Controlled Product

Specs

Rear SPECIFICATIONS

MBUS – Rear

Weight, w/ hardware: 1.3 oz.
Height above rail, stowed: ~0.51 in.
Center of aperture to top of rail: 1.42 in.
Length, stowed: 2.6 in.
Length, deployed: 1.5 in.

WINDAGE ADJUSTMENT

~0.7 MOA (0.754"/100m) per click with a 14.5" sight radius
~0.5 MOA (0.547"/100m) per click with a 20" sight radius
Front SPECIFICATIONS

MBUS – Front
- Weight, w/ hardware: 1.2 oz.
- Height above rail, stowed: ~0.51 in.
- Length, stowed: 2.6 in.
- Length, deployed: 1.5 in.
ELEVATION ADJUSTMENT
- ~1.6 MOA (1.886"/100m) per click with a 14.5" sight radius
- ~1.2 MOA (1.367"/100m) per click with a 20" sight radius

*NOTE: Cannot be mounted to a railed gas block due to excess heat issues. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. Because of this the sight is also not compatible with MOE Hand Guards.