PATCH-OUT Bore Cleaner


Temporarily out of stock


Brushless LIQUID Bore Cleaner



Sharp Shoot R™ Precision Products® announces new sister product WIPE-OUT "PATCH-OUT"™ which is to be used as a conventional non-aerosol improved version of the "original" Wipe-Out™ Brushless Bore Cleaner. The new sister product is an answer to a problem where the shooter likes to use conventional methods of bore cleaning liquids. This exciting new product is easier to use and is considerably less messy. It has no complicated method of application. You simply put it on a patch or a mop and swab it thru the barrel. No Muss No Fuss !

"PATCH-OUT" ™ has been designed to be a maximum strength product. In our testing we found that "PATCH-OUT" ™ was capable of dissolving more fouling than any product currently on the market.

The recommended use for WIPE-OUT "PATCH-OUT™ is to apply it to a patch or a mop push it thru the barrel and let it set to dissolve the fouling from the barrel.

This product has been designed to be totally brushless, and the strongest formula available.

#1. A conventional bore cleaner that is applied to a patch or mop and allowed to soak while it dissolves the fouling left in the barrel/

#2 A Pre- Soak Patch used before using WIPE-OUT "ACCELERATOR"™ "PATCH-OUT"™ will loosen powder fouling and speed the dissolving of copper and carbon if applied before applying"ACCELERATOR"™ You the apply WIPE-OUT aerosol as usual. This method will maximize the removal of fouling in the shortest possible time.

#3 Use "PATCH-OUT"™ as a barrel swab in between relays or between shot strings to remove powder fouling and begin the job of dissolving carbon and copper. This method is a quick solution that will ensure the cleaning job you do when you have more time will be positive and complete. Many shooters need a product that will clean in the shortest time possible because they have severe time constraints. The body of competitive shooters falls in to this group because they all have minimal amounts of time to clean their firearms between relays. Additionally during break-in of a barrel it is normal to clean the barrel every few shots for at least the first 100 to 150 rounds. Or you may be a high volume shooter , who shoots a large number of rounds before being forced to clean due to the degradation of accuracy. In these particular situations a faster method of cleaning is necessary.

While this product has been designed to be totally brushless, admittedly there are those who still wish to use a brush. If the user will take two strokes through the bore with a nylon brush "PATCH-OUT" ™ will produce a luxurious thick lather. Allow it to set as per original instructions for faster results.

"PATCH-OUT" ™ may be used to maximize speed and efficiency along with WIPE-OUT ACCELERATOR™ .  When you apply them together with a nylon brush......they will create a suds.

Our tests show that using WIPE-OUT ACCELERATOR™ in combination with PATCH-OUT ™ will effectively dissolve twice as much fouling. Or in other words it will make WIPE-OUT ™ work twice as fast.

WIPE-OUT "PATCH-OUT" ™ is meant to be used by itself as a cleaner, or in combination with ACCELERATOR™ .

WIPE-OUT PATCH-OUT" ™ is as safe to use as WIPE-OUT™ and in no manner compromises the safe use of either product.

WIPE-OUT ™ PATCH-OUT" ™ it self is a revolutionary new product that solves all the problems encountered with conventional bore cleaners. By itself it works almost twice as fast as the original formula. It also has the capability to remove twice the amount of fouling. When combined with ACCELERATOR ™ it is the strongest and most effective product currently available .

Removal of metal fouling and carbon from the bore can rejuvenate and restore accuracy to and badly fouled firearm. Heavy amounts of brushing to the bore of a firearm can produce damage and un-necessary wear. New WIPE-OUT™ PATCH-OUT" ™ and WIPE-OUT ACCELERATOR™ were formulated to utilize technology in the safe removal of all types of fouling from the barrel faster, and more efficiently.......and without brushing.

The criteria for this new product WIPE-OUT ACCELERATOR™ were a tough group to satisfy individually let alone collectively. Sharp Shoot R Precision developed this product with the aid and consultation of competitive shooters, gunsmiths, barrel makers, and manufacturers within the firearms industry. The resulting research and development team produced a revolutionary new type catalyst to enhance the great properties ofWIPE-OUT™ Brushless Bore Cleaner©:

 I. WIPE-OUT "PATCH-OUT" ™ will dissolve copper , bronze, cupro-nickel, brass fouling in the bore twice as fast and in half the time without brushing.

II. WIPE-OUT "PATCH-OUT" ™ will protect all metal parts including the bore against corrosion & rust.

III. WIPE-OUT "PATCH-OUT" ™ is totally safe for all steels (both stainless and carbon)and all metal plating.

IV. WIPE-OUT "PATCH-OUT" ™ is harmless to modern gunstock finishes. (it is not for use on shellac, varnish or oil)

V. WIPE-OUT "PATCH-OUT" ™ dissolves carbon without brushing

VII. WIPE-OUT "PATCH-OUT" ™ dissolves smokeless powder fouling, and black powder fouling, and primer fouling.

VIII. WIPE-OUT "PATCH-OUT" ™ has color indicators show the presence of metal fouling, powder fouling and carbon. (Metal fouling is navy blue, Powder fouling is grey or black, Carbon is tan or brown.)

VIII. WIPE-OUT "PATCH-OUT" ™ is odorless, relatively safe and easy to use.

X. WIPE-OUT "PATCH-OUT" ™ cannot gum or leave behind solids that render the firearm useless.


The final product " WIPE-OUT™ "PATCH-OUT" ™ Brushless Bore Cleaner© " and WIPE-OUT ACCELERATOR™ both have undergone extreme testing by Competitive Shooters, Gunsmiths, Law Enforcement Agencies, and manufacturers within the firearms industry.

Test results were dramatic , in each and every case Wipe-Out™ "PATCH-OUT" ™ and WIPE-OUT ACCELERATOR™ removed all traces of metal fouling, powder fouling and carbon. . .. . . with no brushing.!



The "PROOF TEST" is used any time you need to know what condition the barrel is in. We use the "PROOF TEST" when we need to know if a firearm is clean or needs to be cleaned.

TO RUN A "PROOF TEST" you put an application of either WIPE-OUT ™ or PATCH-OUT ™ in the barrel of the gun you wish to test. Let this application set in the barrel around 10 minutes. Push a single patch thru tho bore. If there is any fouling present in this barrel it will show up immediately on the patch. 10 minutes is long enough for the chemicals in our formula to react to any sort of fouling.

1.Copper will show up on the patch with a deep navy blue color.

2.Carbon will show up on a patch as the color brown.

3.Powder fouling will always be gray or black in color.

4. Molybdenum will show up as long black stripes ( it’s coming off the bottom of the grooves)

No color or a clean white patch is evidence of a clean barrel.

We use this test any time we are not sure of the condition of the bore.......or to determine if we need to re-apply

either WIPE-OUT ™ or PATCH-OUT ™.


If you get any color on the patches it will be necessary to re-apply either WIPE-OUT ™ or PATCH-OUT ™ and then let them set of another overnight session. Color on a patch after an overnight session is evidence that the cleaning products used in the past have been in-effective. The most heavily fouled firearms usually do not require more than 3 overnight applications. Run the "PROOF TEST" after each overnight session to see in the firearm is once and for all finally clean.


Badly fouled barrels that show color after the "PROOF TEST" should have another application of either WIPE-OUT ™ or PATCH-OUT ™ and should be left to soak overnight. Patch out the barrel the next morning and re-run the "PROOF TEST" . No color means you have a dead clean bore. Now you should be able to put 20 tp 50 rounds on this barrel and clean it in something less than 1 most cases under ½ hour. NO MORE GUESSING.......The "PROOF TEST" is the most reliable way to determine the condition of your firearms.

If necessary and you have a barrel that is heavily fouled with copper, you always have the option to use some ACCELERATOR ™. This product may be used in conjunction with either WIPE-OUT ™ or PATCH-OUT ™

Please login to post comments


The cart is empty